SC233HGS is a back‑side illuminated (BSI) global‑shutter CMOS image sensor built on SmartGS®‑2 Plus platform. It integrates single‑frame knee HDR and on‑chip ISP, supporting external hardware trigger sync, window cropping, mirror & flip function. Output RAW 8/10‑bit data via MIPI / LVDS / DVP interface. Ideal for high‑speed motion capture without rolling‑shutter distortion.

Parameter	Value
Pixel Array	1928 H × 1208 V (active array)
Effective Resolution	1920 × 1200 (2.3 MP)
Pixel Size	3.0 μm × 3.0 μm
Optical Format	1/2.6"
Max Frame Rate	120 fps @1920×1200 RAW
Shutter Type	Global Shutter (SmartGS®‑2 Plus), external trigger supported
PLS (Parasitic Light Sensitivity)	＞40000
Read Noise	3.24 e⁻ (typical)
Dark Current	260 e⁻/s @ 80 °C (typical)
Sensitivity	9650 mV/lux·s
Dynamic Range	Linear mode: 61.5 dB; HDR mode: 91.5 dB
SNR	37.5 dB (typical)
CRA	15°
Output Interface	1/2/4‑Lane MIPI‑CSI‑2; 1/2/4‑Lane LVDS; DVP (12/10/8‑bit)
Output Format	RAW 8‑bit / 10‑bit
Control Bus	I²C; Hardware sync: FSYNC / EFSYNC pin
Power Supply	Analog: 2.8 V ± 0.1 V Core digital:1.2 V ± 0.06 V I/O:1.8 V ± 0.1 V
Operating Temperature	‑30 °C ~ +85 °C (full range) Best image quality: ‑20 °C ~ +60 °C
Package	48‑pin CSP (SC233HGS_CSP, used in module QW‑D02001A V1.00)

Typical Applications

Humanoid robot binocular stereo vision, SLAM & obstacle‑avoidance
AGV / AMR navigation
3D scanner, structured‑light / stereo matching system
Industrial barcode reader, high‑speed machine vision
Drone on‑board camera

Binocular stereo module for humanoid robot SC233HGS module